Where can I find the owners manual for my Chamois Hagar? You can find your owners manual at the below link. Please reference the owners manual prior to your fist ride. Here
Why a 50mm stem? The Chamois Hagar takes geometry queues from our mountain bike heritage and features long top tubes. As it has been proven with mountain bikes, a shorter stem and long top tube keeps you in a pedaling position that maximizes power output and stability of the bike.The Chamois Hagar was designed around a 45-50 mm length stem. If you are looking for a longer stem we offer 70mm and 80mm stem options.
- 700x50c is the max tire that can be run on the Chamois Hagar with a single front chain ring.
- 700x40c is the max tire that can be run on the Chamois Hagar with a front derailleur.
- 700x40c is the max tire that can be run on the Chamois Hagar with fenders installed.
In some cases the front fender might need to be trimmed in length due to where the fender struts sit on the inside of the fork legs.
The Chamois Hagar is not compatible with suspension forks on the marke given the custom offset and axle to crown on the Chamois Hagar.
The fork needs to be removed from the head tube so that you can reach into the head tube area in order to guide the housings out of the internal guide holes.
There are entry points for the housings at the rear of the bike. The brake is on non-drive side inside of the chain stay and sits on the outside of the seat stay above the drop out.
When routing the housings from the rear to the front there is a removable cover on the outside of the down tube just above the bottom bracket. Remove this cover so that you can guide the cables up the down tube.
Once the housing is in the bike you'll want to connect the housing to the non-drive side drop bar GRX brake/shift lever.
AXS The AXS kit comes with a Rockshox Reverb AXS dropper post and this post does not require any cable instal.
*You can add a button called the blip for additional customization of the shifter and dropper post. The blip is not included with the Chamois Hagar.
The Chamois Davis includes a 4mm shift plug, 5mm brake or dropper hose plug, solid flat plug to fill any holes not in use and an angled solid plug.
*For Di2 drill a hole in the solid plug in order to run the Di2 cables.
**Angled solid plug goes in the back of the front derailleur cable exit in the seat tube when there is no front derailleur installed.